Vetroo V240 White Liquid CPU Cooler 240mm Addressable RGB Pump & PWM Fans 250W TDP AIO Water Cooling w/Controller Hub for Intel LGA 1851/1700/1200/115X AMD AM5/AM4 for Gaming Console

Keeps my cpu super cool and works like a charm!

I bought a pre-built a couple of weeks ago and it came with a super cheap CPU cooler that needed replacing. I didn't really want to spend an arm and a leg because this AMD 3700x isn't going to get overclocked and even with the stock cooler temps were in the high, but acceptable, operating range. Anyway, I saw this one and it's aRGB matched the rainbow puke on of the front of my case, video card, and fans, and it didn't break the back so I decided to pull the trigger.First off, this was probably the easiest of any cooler I've ever installed. My only complaint, which they've addressed in a couple of YouTube videos, is that the AMD4 socket installation is just a top and bottom hinge, while the Intel installations use all four sides. It sounds worse than it is, because you can clip it right to the motherboard, it needs no backplate or removing of the back side of the case, and it literally took me less than 5 minutes to install. Once it's tightened down and firmly in place, it's not going anywhere, so the 2 hinge complaint is minor at most.The beauty of AIO's, even cheap ones, is that even if they don't cool any better than better air coolers, they take up significantly less room around the CPU. The best air coolers are giant monsters the size of a softball, that's why I went AIO. As you can see from my attached photo, everything is nice and clean with plenty of room to breathe.Anyway, on to the temps. This case is absolutely tiny. It's a good 3 inches shorter than my other PC which has a Phanteks Eclipse P300, which isn't a large case to begin with, so I wasn't expecting miracles. I've been pleasantly surprised. I got 5 settings for CPU fan speed on my motherboard, and on the 3rd or 5, which I find a good compromise of temp/noise, I idle at ~35c and at typical load it's ~55-60c. The stock cooler ran at ~60c idle and around 85c at load, so quite a nice improvement. There's also the benefit of a much quieter system. If I cranked up the fan speed on this I could most certainly hit even lower temps, but these are well below what they need to be and I think the noise reduction means more than a few Celsius less.For $70, which is what I paid, I think it's a good product. It's only been installed for about a week now, so I can't speak to longevity, and will definitely update my review if anything changes, but so far, so good. I'd definitely recommend it if you are looking for an AIO on the cheaper side, especially if you are looking for one with aRGB, which are usually fairly expensive. If rainbow puke isn't your thing, you can probably find other models that are in the price/perfomance range that will suit your needs just as well.A for installation, looks, and price. B for performance. Overall, a decent piece of hardware.

llevo 2 años con esta refrigeración líquida y ha funcionado perfecto

The media could not be loaded. WARNING!! --THIS DOES NOT COME WITH THE AMD MOUNTING BRACKETSthe box includes the square rings for the standard amd hook mounting hardware but not the hook mounting brackets. I was lucky and found some in my spare parts but beware this could have been a problem. this is my work computer and I purchased this for the same day delivery option.Otherwise, i am very happy with it. The unit uses PWM for AIO and the ARGB for the pump lighting & on the fans. I already have some high-quality 240mm ARGB fans hooked to a RGB converter and i was able to use those instead of the provided 2x 120mm fans and the pump lighting synced up perfectly rather than the common random lighting effect. I was happy about that. All in this improved my temp rating on my 23% overclock from an average 47C to ~29C. Would recommend if you have the mounting brackets for AMD.

very beautiful cooler!!!! used it for my very first build and i’m very happy with it!! :) only concern is that i dont really know how to change the color besides taking the back panel off but overall a great for a first build!!

Me parecio fabuloso tal cual como quedo con mi Setup. Me parece muy silencioso, las luces RGB son facinantes. El enfriamiento se mantiene en muy buenas temperaturas.Lo unico malo que podria decir es acerca de las instrucciones, son totalmente incomprensibles. No se entiende nada. Tuve que buscar algunos videos para poder ver como es que va.Al abrir la caja y ver el cooler, mis primeras impresiones fueron bastante buenas. El empaque era lo suficientemente bueno como para que no hubiera aletas del radiador dobladas, y se incluyó todo el hardware de montaje requerido. La bomba y ambos ventiladores se iluminan con una agradable iluminación RGB, y cada uno de los ventiladores tiene 12 LED RGB direccionables. No tengo idea de cuántos LED hay en la bomba, ya que no puedo ver eso tan fácilmente. El enfriador también vino con un pequeño concentrador de controlador RGB montado en un imán (4 puertos), que tiene la opción de controlarlo a través de un botón en su carcasa (usando el botón de reinicio, o un botón RGB si tiene uno), un botón en el concentrador , o a través de su placa base directamente si es compatible con iluminación ARGB. El controlador tiene un conjunto limitado de patrones de luz, pero los disponibles se ven bien.Pasando a las instrucciones, lo único que puedo decir es buena suerte. El cuadro enumera una serie de enchufes, pero las instrucciones no cubren LGA1366 o LGA775. Supongo que el proceso de instalación de estos es el mismo que el proceso de instalación de los otros sockets LGA, y no es particularmente importante dado que son sockets antiguos y obsoletos. Las instrucciones están en un inglés bastante irregular y son difíciles de seguir. Mi línea favorita y más confusa de las instrucciones fue: “La cubierta de los productos AMD abrió la parte inferior del producto de alineación del ángulo de instalación de la aspiradora después de bloquear el ángulo de instalación del tornillo”. Sea lo que sea que eso signifique, no estoy seguro. Sin embargo, las imágenes del folleto de instrucciones están lo suficientemente bien juntas como para que sea obvio lo que debe hacer para instalar el enfriador. Envié un correo electrónico a la empresa sobre esto y me dijeron que estaban trabajando para reescribirlos.