Deliver to Malaysia
IFor best experience Get the App
🛠️ Stick with Style—Your Home Deserves It!
The ANCIRS 30 Pack of 25mm Suction Cups is designed for versatile home and kitchen use, providing a strong hold without damaging surfaces. Made from eco-friendly rubber, these suction cups can support up to 40 pounds, making them perfect for hanging decorations, organizing spaces, and more. Easy to apply and remove, they are a practical solution for any household.
Color | 25mm |
Brand | ANCIRS |
Material | Rubber |
Finish Type | Polished |
Mounting Type | Hanging |
Style | Contemporary |
Item Weight | 0.01 Ounces |
Maximum Weight Recommendation | 40 Pounds |
Manufacturer | ANCIRS |
Part Number | AN2377 |
Item Weight | 0.01 ounces |
Package Dimensions | 7.52 x 4.72 x 1.06 inches |
Item model number | AN2377 |
Finish | Polished |
Item Package Quantity | 1 |
Batteries Included? | No |
Batteries Required? | No |
E**Y
the suction is good!
i had to order 3 different sizes just because we werent sure how to measure a circle! we finally got the 30mm and it fits snug in the holes of our tv stand but they work perfectly! now my son can play on it without the glass tv table top moving. we even have enough for 2 more sets to replace if the suction ever gives. thanks again!
T**D
Perfect replacement for my glass table top
I have a table where the little suction cups between the metal frame and the glass table top had completely disintegrated into sticky gooey plastic blobs. No doubt the result of exposure to sun light which can be harsh on some materials.I was afraid it would be difficult to find a matching replacement but was very happy to find the ANCIRS product page which had suction cups in various sizes and with different attachment options.Since the original suction cups where stuck into holes within the metal table legs, some of the offered suction cups could be disregarded immediately. Since the original suction cups where all too far gone to get any meaningful measurements from them, I measured the hole size within the table legs which turned out to be 7.6mm or 0.3". This left me with either the 20mm or 30mm size suction cups (the size on the ANCIRS product page is the outer diameter of the suction cup and unrelated to the snap-in on the rear). From the product description I gathered that the 20mm size would work, but might be a loose fit while the 30mm size might be a struggle to insert but provide a more rigid fit.I decided to buy the 30mm size and while it was indeed a bit of a struggle to get them into the holes, they are a perfect fit once they are properly in place.I'm very happy with the purchase and hope these will last a good while. Even if they don't, the generous amount (30 of them in one bag) means that I can replace them multiple times before I have to buy them again (I'll be sure to keep the spares out of the sunlight).
J**M
Fit well, stick well.
Fit well in an old black frame desk I have which was missing 4 of the little suction cups.The cups are just slightly thicker than the originals; though still work well. I haven't felt the need to swap out all the originals though there's the slightest difference in the height of the glass; though I wouldn't recommend mixing new and old.
F**S
Worked great
I bought this to fix our glass table top. We replaced all for suction cups and now the top doesn't move at all. I did have to trim them down a little to go into the metal holes but that was cause I didn't have enough strength to push them in.
A**R
Doesn't keep suction as well as the old ones I had.
Suction power is ok but not as good as the old ones that came with kitchen sink pad/sponge holder.
A**E
grst replacement
I got these as replacements for the original suction cups on a TV stand. I had to trim them just a little bit about not full half but just like a little corner of it down to make it fit the hole properly. but they are amazing. the factory wanted her yellow and just old so I had to get new ones put in and definitely recommend these
I**A
Stemless wine marker charm
Bought these to make wine glass charms for guests to be able to find their glass. Cups did not stay stuck. After a few minutes they pop off.
J**K
Not for my purposes.... but maybe yours
I got these to hang a wooden thermometer (shaped like a moose) flat against a window pane - the old cups needed replacing. The problem is that the suction cup (original) was attached by a screw that went Through (if you can believe it) the center of the suction cup. Recipe for failure. Air leaks past the screw, carrying dust, and eventually it won't stick.I was looking for something that would fit OVER a screwhead, leaving the cup side intact. Well. These don't.That said, these are actually great cups. I used a couple with a hook and they held for... well, they're still holding, supporting some stuff for a couple of weeks now with no sign of leaking air (clean the window really good before applying).So. If you're going to use a hook over the knob on the cup, you're gonna love these things. I really recommend them for that. If you've got a moose that's trying to tell you how hot/cold it is.... not so much.
S**D
Good Consistent Quality
These are of good quality and are very consistent. Mostly clear with a slight blue tint. Flexible so they really stick well to smooth surfaces!
J**A
Soportes
Buena adherencia pero piezas pequeñas
D**M
Deceivingly Strong Suction!
Initial responss was certainly doubtful, especially since I needed these to act as replacement for my roller sun shade, and the Middle Eastern heat has been demolishing the stock suction cups. So imagine my surprise when these, that too, being much smaller size practically couldn't be disengaged form the windscreen!Highly recommend!
C**T
Ventouse
Tres bonne adhesion
K**R
Worked perfectly
Bought to replace old stoppers on a glass table top which had lost their suction. (I had nearly knocked the table top clear off the frame bumping it when walking past) These are perfect, the measurements given are accurate so it was just a case of removing the old ones and dropping these in place, and the suction is so good that if I bump the table top now it doesn't shift on the frame at all! My only minor quibble is with the pack size as I now have several left over which I have no need for.