Solid Tire for Xiaomi m365 Electric Scooter Mijia Mi m365 pro/gotrax gxl V2/gotrax XR, 8.5 inches Electric Scooter Wheels 8 1/2'' Front or Rear Replacement Honeycomb Solid Tires(2 Piece)

Totally a pain in the jackass to put on, but once they were on, they look great and are holding up well. I'm glad I never have to deal with GoTrax tubes again! The trick.............after you heat them up, put a small section on the rim and then put all of it into a workbench vise! Use a rag or towel so you don't scratch up the rim. Crank down the rim and tire into the vise and then use a big screw driver into the holes in the tire to work it onto the rim! Once I got that down, the tire went onto the rim all the way around, and then use a small tire iron to pop the tire beads onto the rim and everything will fall into place. Before you start this, make sure you have some strength in your hands and arms. This process is not for the weak!

I recently installed the Cooryda Solid Tires on my Gotrax Apex scooter, and while the process was quite challenging, the results are promising!I followed the installation instructions closely, including boiling the tires for 15 minutes to soften them. Yes, the installation was tough, but I believe that’s primarily due to my own strength. If you find it difficult, just remember that a little extra effort can go a long way! Once on the rim, I had to readjust the tires for a proper fit, pulling from the opposite side to ensure they seated correctly.I've added a video on my profile to help others with the tire adjustment process. Overall, these tires feel solid, and I'm optimistic about their durability. I’ll update my review in a few months to see how they hold up!

Tire is great. Bought for GoTrax V2. Not sure why most of the reviews are talking about difficulty installing the tire. Its very simple. Just microwave the tire for 3 mins. Use the tool comes with the tire and one more set of screwdriver. It will not take more than 5 mins. Use your feet to press the wheel on tire and then use the tools. Very simple. I hope tires are good after few rides.

Bought for my son’s HiBoy S2. They fit snugly but were a pain to get on as expected. Definitely heat them in boiling water first. I would buy them again.

Worked perfect for the Gotrax RIVAL Scooter.Filled a metal garbage pan on a Turkey Fryer base.Waited for a rolling boil and placed one tire for 20 minutes flipping 10 minutes in to finish on the opposite side for a remaining 10 minutes.Removed the tire and got one spot in the rim. I then rotated the three spoons that came in the Neiko 14.5” tire spoon kit.I did have a 2nd person help with one extra flat head screw driver in 2 different spots as I rotated the 3 spoons.After it slipped on, I did need to take a flathead screwdriver and put on the side that the bead was in the rim, took a 2nd screwdriver and helped to coax the bead into the other side.After 20 minute boil, took about 10 minutes to get the tire on the rim.

First off, great product and the seller is very clear on how best to install by boiling the tires in water. Having said that and done many 12" and 16" motorcycle tires, you are going to need at least two more tire spoons and another person.DO NOT boil these in a pot you intend to cook out of. When you boil these in water, they will leave behind molding release agents and likely some other petroleum chemicals turning the water brown with foam on the edges. On the boiling water part, I have a turkey fryer burner and an 8 qt pot that I never use, which was perfect. Frankly these tires ARE WORTH buying a Walmart chuck-away pot to do.On the installation... realize that after 15 minutes of boiling these in water, they will be HOT, so I used thick, leather gardening gloves. They do get pliable, though you are going to have to really know what you're doing with tire spoons and how to get them on the rim. I'm experienced and this was a lot more effort; smaller tires means more effort.Through all of it... yeah, I'd do this again for the price and durability of these things. Would I switch over if the scooter just needed a new tube and the existing tube tires were fine... probably not. That was not the case for my son's scooter. It's tires were very worn and the tubes were shot. I am truly impressed with these tires and if he does wear these out, I'm not looking forward to what it will take to remove them... will likely resort to cutting them off.

fits wonderfully on my gotrax elite xr! managed to grt it on without boiling them but its definitely a pain to do it that way lol

Tire may be good, but is imposible to install, even following directions, warming, put oleum, use a big tire leveler, will update if i ever get the tire inside