DGSL Garage Door Seals Bottom Rubber Weather Stripping Kit Seal Strip Replacement,Universal Weatherproof Threshold Buffering Sealing Rubber 5/16 Inch T Ends, 3 3/4 Inch Width (20 Ft, Black)

Review date: August, 20, 2023 -Other reviews mentioned things such as this being a flimsy product and easy to rip or tear it even by hand, and about it being difficult to install. I found neither of those things to be true with the product I received. It was exactly as advertised and pictured. The rubber is heavy duty, supple, easy to work with, and feels durable for the long term. I tried to tear it by hand (as shown in one review with a video) and I couldn't begin to tear it. The quality seems plenty good to last for many years, even here in Wisconsin where we have temperatures as high as 100F above zero in the summer to as low as 35F below zero in the winter.Still other reviewers mentioned that it was difficult to install and that they had a lot of problems. I ordered a 20-foot piece of this product to use on a pair of 9-foot-wide garage doors. I pulled out the old door seals which had seen many, many better days and were in terrible shape, brittle, broken, flattened, missing big chunks, and being at least 25 years old, origin unknown. I then used a broom to sweep the dirt and cobwebs off the bottom of the doors that had been hidden under the old seals. Then, I lubed the T-slots that this product slides into, all the way across the door using a product I had on hand called Fluid Film spray (great, useful product in its own right and available here on Amazon).I was able to replace the seals on both doors in about 30 minutes by myself, including gathering materials before and cleanup after. With one hand, I formed the new seal into a cup-shape (it ships flat and rolled up) and fed it into the door seal mounting slots, and with the other hand I pushed it along the bottom of the door until it reached the other side. I did it all while standing in one spot at one end of the door, and did not utter one cuss word the whole time. Then I used a good shop scissors I have to cut off at the proper length. Easy-peasy! The process of feeding the new seal through the slots took less than five minutes per door.Because of some of the reviews that said installation could be a headache and took them a long, frustrating time, I almost didn't do it today because it was a bit hot outside and I didn't want to get into problems in the heat. But on the spur of the moment this morning I decided to do the installation and it went great. I couldn't have asked for better if I had designed the garage doors and the seal myself.If I notice any undue or early wear on this product that shouldn't be happening I will come back to update this review, but thus far I'm very happy with the product, the installation and how much better the new seals look from both inside and outside of the garage. Much less light comes through compared to the old, worn-out seals, which means more of old man winter will stay outside where he belongs, and we heat our garage to about 60F in the winter, so that is a good thing.TL/DR : Great product. Heavy-duty, easy to work with, easy install went great, and I'm a happy customer.

These garage door weather seals are very well made of thick durable rubber which creates a very tight seal between the garage door and floor. Easy to install with a little WD-40 to lubricate the track. Would definitely buy again. Timely delivery and secure packaging.

Thank God for my wife. If she were not around, I never would have been able to install this on my own. The seal has two T's that slide into two T slots on the seal holder on the bottom of the door. The T's on the seal are a little larger than the slot in the track. In order to install this, you need two people: One to shape, and guide the seal and the T's into the T slots. It can bind up easy, and tear or get damaged, and come out of the slots. I used a jewelers file to take the edges off the T-slots, and I opened them up just a bit to help facilitate installation. The other person applies hefty amounts of silicone lube spray on the seal, and in the slots, then uses their entire body weight to PULL PULL PULL PULL PULL PULL PULL PULL PULL and pull the seal down the 16 foot long track. It is one GIANT pain in the toukas. But after a couple of hours riding the struggle bus, we managed to get it installed. I had to use vice grips to push it to the very end since there was no room for me to pull. Besides the difficulty installing this, it fits perfectly, and seals the door to the floor very well.

I purchased this to replace the old and shrunken seal that came on the door. It comes rolled up so unroll it and let it flatten out a few hours before installation.It says to insert the two edges into the channel at the bottom of the door and slide it across. To aid in this endeavor, I cleaned the track and sprayed a liberal amount of silicone into the track. Trying to get the two flat edges started was challenging to say in the least, and one started, trying to feed it into the track is a two to three person job. My wife helped me and we could only get about 3 feet fed into the track before it started to bind and the flat piece would pop out of the track. The seal is also heavy (which is good as it is higher quality) which also made it hard to hold up and feed into the track.Finally, we gave up and just fed on of the edges into the bracket and fed it successfully across the entire door. I was then able to take the other edge, insert the one side at an angle into the groove in the bracket, and use a wide flat blade screw driver to push the other edge up into the groove of the bracket. It went rather well doing it this was and was much less frustrating compared to trying and failing to insert it as directed.I closed the door by hand and it tightly seals the bottom of the door. I did have to adjust the garage door opener since the door doesn't go down as far as it did with the wimpy thin old seal. But that took about a minute of adjusting to get it to seal perfectly.I am really please how well it seals and will now buy another to replace the seal on my other garage that has an unlevel cracked concrete floor. I can see if you have a dirt or gravel floor where this is a must have seal. As you can tell, after getting over the initial installation frustration, I am very pleased with the quality and function of the seal.

Just installed this as a replacement for one a ** rat chewed the original gasket to bits trying to access my garage. (It is no longer with us, Thank you very much.)Feeding a heavy pliable rubber gasket can be a challenge to install depending on you door's setup to access the channel easily.FAR EASIER with two or even a third person to hold the remaining coil, you will see.One to hold the heavy coil, one to pull from the other end as it feeds in, and YOU to inch it along, being careful to not let it pop out of the channel. I first needed to clean and lube the aluminum channels with WD-40 so the rubber would not bind once a lot of it was inTook maybe 30 minutes once I had it prepped.I'm happy with results.

Here's what I did for an EFFORTLESS installation1. Remove the old one and clean the inside of the tracks with small brush.2. Lube the heck out of the tracks with a silicone lubricant spray. The tracks were was literally dripping from the silicone spray!3. Start from one side and slowly push it inside the tracks. I did a 16 feet garage door in about 5 minutes top!4. Trim to it if too long. Voilà! Done!Don't know why some say it is flimsy or that it readily tears... For sure, if you pull on it like mad, it will tear. Just push it slowly from one side once liberally lubed!

La firmeza que le dé la parte tubular del centro

A little shorter than 20ft maybe 19.5 Feet. Definitely need silicon spray and a second and preferably third person to install. Takes about 10 minutes to install. Arrives tightly squashed in a roll and appears to be damaged but once installed it’s fine and has a good shape to it. The end lugs are 8mm.I was quoted $750 to install one. This was 1/7 the price including the silicon spray! I’m satisfied.

It was easy to install and the product was very efficient

Muy bien echo y fácil de instalación