Pool Patch White Pool Tile Grout Repair Kit, 3-Pound, White

I used this last fall to patch a few spots where there were small to moderate sized voids in the existing grout. It held up through the winter months and looks fine as pool season begins. (I found for my purposes that it was easier to use from in the pool since I was working on areas just under the coping.) Just be sure to gather everything you need to work with small batches of the patch material, as it hardens fairly quickly.

Works great and is a good option for repair

This is good stuff. It is easy to use. If you have never grouted anything before, this is for you. A few tips; order more than you think you will use; if you are using it on a vertical surface (pool wall) as opposed to a flat surface you will have a much higher loss; Mix a small amount first and work on the consistency. You have to add water to it, but do it sparingly; For grout lines 1/4 inch or greater mix to mashed potato thickness; If 1/8 or thinner make it just a little soupier so you can push it between the tiles; keep a little container of water near by to add to the mix as it dry's while you are using it. Before you start the job, open all the containers and make sure that the liquid bond bottle is inside. Out of four 3 lb. containers, one did not have the bottle. For this I reduced this review by one star.

This stuff is great. I cut the amount in half and then in half again. So about 12 ounces of powder with 1 tbspoon of the bonder, then kept adding a tablespoon of water until it turned into a paste like grout does. Works great, just used my finger ( you could put gloves on too but they just got wet and made the grout wetter) and smeared it where I wanted it. It’s best if you get in the pool, makes smearing easier. If some drops in the pool just swish it with your food and it will dissolve. Hardens in 5 minutes. Then you can go over it with a sponge to get rid of haze. Couple hours later it will be hard as a rock. Looks great, very white. Would definitely recommend!

Uplifted the pool tiles of 28 years installed. Groves would accumulated mildew and filths. Problem solved.

Product is like any other grout, but has the bonding agent. I suggest mixing in small batches. I did all my tile in about 2 hours total. I used a grout float and my fingers to apply. Have a couple of tile sponges available and a bucket. It's only been a couple weeks since I installed, but seems to be holding up fine. Looks great! Didn't think anyone would really notice, but have had a few ask what I did. Either my old grout was really that bad or just the nice bright white really pops! In SWFL so curious to see how it holds up after the summer. 👍🏼👍🏼

This might be a good product, but it arrived inside the shipping box in a white plastic container that obviously had a large label removed that had previously been covering the product instructions. When the label was removed prior to shipment, so were most of the instructions. I went to the manufacturer's web site to get the mixing/application instructions. I'll update this review once I've used the product.

My pool was built with a track for strip lighting on the top, under the top lip edge of pool, but they left a much too wide grout line at the very top above the plastic track as this company did not normally build pools with this option. As the pool and house settled this large grout line all around the upper lip of the pool started to crack, fall out, get dirty, etc Not being very handy I bought Pool Patch Grout repair to try and fix this myself. It was easy to work with and now looks great. I redid the entire top edge around the pool, even the pool cleaner was amazed that it worked so well and wanted the brand name! Just mix to mash potatoes consistency, wear gloves and spread with finger, it was to hard under the lip to try and use grout tools there, no room to angle in tools, hardens quick. need to step on any little pieces that fall off into pool to disprerse so you don't have any crumbs laying around or sticking to pool bottom. I would highly recommend.