Color:Car Door Edge Guard Fitment: Universal fits for most car truck SUV with door edge thickness 2mm / 0.078 inch. Features: 1. Protects the vehicle door and boot edges from scratches and dents. 2. Helps prevent damaging other cars when opening your door in car parks etc. 3. Easy to fit and can be trimmed to the required length. 4. Install for: car doors/boot lids/tail-gates/trunk/hood. Material: Made by high quality rubber material, heat resistance, abrasion resistance, anti-aging, waterproof and UV proof. Size Recommendation: (For refernce only, Please measure your car before purchase.) A. 4 doors edges: 5m (16ft) B. 4 doors edges + 4 doors bottom edges: 10m (32ft) C. 4 doors edges + 4 doors bottom edges + Trunk: 15m (48ft) D. 4 doors edges + Trunk: 10m (32ft) E. 4 doors edges + Trunk + Hood : 10m (32ft) F. 4 doors edges + 4 doors bottom edges + Trunk + Hood: 5m(16ft)+10m(32ft) G. SUV 4 doors edges: 5m (16ft) Installation Reference: Steps 1: Clean the door edge to remove any oil, wax & dust. Make sure the door is dry before continuing. Steps 2: Uncover the tape from the tip of the lining (Ensure the tape is install INSIDE the door) and peel the red strip off the tape by approximately 2 inches. Steps 3: Start from the top, insert the lining onto your door edge until the lining is fully seated. Steps 4: Press the lining with your thumb along the door edge until it is fully seated, then pull the red strip off. Steps 5: Repeat step 4 until all edges are protected. Steps 6: Use scissors to cut away unused lining for other door edges. Steps 7: Let the lining dry up by itself and do not get wet for at least 12 hours.
