6 Pack U Shape Led Aluminum Profile for LED Strips, 1Meter/3.3ft Aluminum Channel with Milky White Cover, Led Track Diffusers with End Caps, Mounting Clips and 90 Degree Corner Connector

Perfect for the led’s around the ceiling. Easy to for, you screw or use the double sided tape.

Really good quality worked really well! Tip make sure you thread ur LEDS as you go!

I bought these LED channels for my first LED strip install. They come well packed and arrived without damage. All the fixings are included to install them in wood or brick (different length screws, rawlplugs etc). I've actually used the longer screws to fix directly to plasterboard and had no issues as the channels are light enough to not cause a problem. The aluminium channels are easy enough to cut with a junior hacksaw and the diffuser can be cut with a pair of scissors. One tip I picked up is to offset the joins in the diffuser lengths from the joins in the aluminium channel - that way you can minimise the visibility of the gaps. In the v-shaped channel there is a gap behind the LED strip that I've used to route a couple of wires for power injection. Overall, I'm very happy with the quality of these channels but a little disappointed with the thickness of the diffuser - using 60 LEDs/m at 50% brightness, the individual LEDs are still visible (it doesn't really come across in the photo). If I need more v-shaped channels, I'd buy these again

Fitted these into my sons bedroom and he loves these, makes the led runs look professional and smart. First I installed the holding clips onto a black painted long wooden baton. Then once happy they were in line and even, secured the baton to the wall with screws and rawl plugs, then placed the aluminium channels into the clips thereby hiding the fixing screws. They make a nice click sound when inserted. Then ran the self adhesive led strips along the channel, I didn’t need any extra glue as they adhered well to the aluminium. Finally I installed the diffusers, I did have a little difficulty with the first one, but by the 2nd I had it down. I found inserting one end in at an angle allowed it to fit into the channel and then ran my fingernail along the edge pushed the the diffuser in easily. Unfortunately the photos I took don’t do it justice, the diffuser does a good job of softening the led lights and helps to give a more even glow. Can’t wait to start placing them all over the house now. Awesome product.

Worked a treat with govee strip lights Cut down the pieces with a mitre saw easily enough, and install was very straightforward. Getting the covers on was fiddly but doable

Decent product overall, but there are no 90 degree electrcal connectors that fit the 90 degree link pieces, and most importantly the translucent diffusers do not stay well-secured in the aluminium gutter. It is supposed to be a friction fit, but I had to tape it down.

Nice quality way to fit and cut trim for led strip The end caps don’t fit tightly so a little adhesive was required the low intrusive profile is good and the diffuse fits great and well ( you’ll need a blunt tool to start it off but once it’s started it’s easy

Very nice product, I used these with led cob lights I purchased on amazon and the 12mm less fit perfectly, the diffuser is excellent as well, really decent product. My one negative is the fact that you can see the clips when they are on the wall, if I used these again I would opt not to use the clips but glue them up instead. Overall though they are very well made.