Tyger Auto TG-RS9D50208 Riser Compatible with 2019-2022 Dodge Ram 1500 Crew Cab 5.7' Short Bed (NOT for 19-22 Classic) 5inch Wheel-to-Wheel W2W Black Side Step Rails Nerf Bars Running Boards

installed the wheel-to-wheel model on my 2020 RAM laramie. for the money the fit and finish, durability, and ease of install is probably one of the best you can buy in this category. me and dad installed them in about 1.5-2 hours, and that includes unboxing, reading directions, etc. the rubber can get slightly discolored because of the small grooves and the material composition, but they still look and function excellent. would buy again. i couldn't find any other options that looked this good, and also had a slim but wide profile with good ground and side clearance. these will also save your paint in parking lots from other vehicles that sit lower than you when they fling doors open without paying attention.

I got these a little over a year ago, and they are rusting on one side of my truck. Two big rust pits, the diameter of a softball. HOWEVER, they do have a 5 year warranty on the black, and within 2 days of contacting the company, they are now sending me out a replacement. Nothing like a company who makes a good product, but also stands by their product if a flaw does happen.

Great product and easy to install, only took about an hour or so. Would def. purchase again. One thing to note is that I did not drill through the pinch welds of the truck for the rear brackets because I didn't feel comfortable drilling holes in a brand new truck and exposing bare metal in the state of Minnesota that uses more salt on the roads in the winter time than the entire nation consumes in a 100 years. I just made sure all of the hardware was tight and snug so the rear brackets had no wiggle room, seems to be just fine even after bouncing on steps. Only giving 4 stars because one of the rails had flaws from the factory in the finish and was noticed upon opening the packaging. Packaging was not damaged either.

One was damaged in shipping and without question sent a replacement. The look great on my truck. Installation wasn’t to bad. Very pleased overall

The side steps were fairly easy to install on my 2021 RAM 1500. Great instructions and pretty easy for a non-mechanic to follow. I don't have any power tools so this was all done with a crescent wrench, took about 2 hours total work time. Also not having a jack stand or lift made it a little more interesting as well. Getting the truck off the ground would have made a world of difference. Had to scrape a bit of paint off a couple of the studs, but it wasn't bad at all. Getting the body bolt out of both sides was a chore, broke my cheap crescent wrench but that was a good excuse to upgrade my tool set. The rails are super sturdy and I don't notice any flex in them. The wife loves them for getting in and out of the truck.

Really good looking steps. These run longer than other so you can reach into the bed. They mount at a slight angle compared to the cab but level with ground. Install is not trivial.

Love the look, only one I could find with 5" flat step wheel to wheel on 2019 new Ram body style. You start out thinking this is going to be so easy, studs already there brackets bolt right on. Then you get to the rear bracket, WOW! The rear bracket bolts to the rear body mount. I was worried I was going to snap the body bolt. (Did they accidently weld the bolt?) I started with a 1/2" ratchet, ratchet with pipe slid over (Thought the Craftsman Ratchet was going to snap), Breaker Bar & pipe 12 point craftsman socket expanded and slipped. Off to the parts store because you know the impact socket you need is the one you don't have. Electric Impact, I do not have a big enough compressor for air and Liquid wrench, PB Blaster, Freeze off, Finally getting slight movement . Call it a Day. Next morning I decide to give it another shot with breaker bar + pipe and impact socket, (WHICH BY THE WAY IS 21MM) . Success at last looked like the bolts were dipped in Loctite. Lot of work not the manufacturers fault, would be a breeze except for the bodybolts. Brackets broke through an inside box in shipment, scratched the one step pad slightly and one tiny dent I didn't even see till after final inspection. Would be nice if the bracket covers were a little bit longer to coverthe gaps as seen in pictures. Pleased overall, Good Value! Check your inside hardware boxes!

The running boards have been alright for the past 2 years. Right away I noticed the step grip for the front doors is too far forward, but I'm not sure if that's just me and how I exit my truck. Now that my product support time ended (1 month ago) I noticed rust forming in the middle of the faces. I could understand some forming on edges or at joints but to be right in the middle...Not happy!