ELUTENG M.2 SSD Heatsink for PS5 / PC Easy Installation Heat Sink M2 SATA NVME Cooling Sink with 4 Thermal Silicone Pads M.2 SSD Cooler Set Heat Reduction for 2280 WD SanDisk Crucial Kingston Samsung

PROS/CONS at the bottom When I got my new 512gb Silicon Power NVME and formatted it, the first thing i did was run a read/write speed test with Crystal Mark. This is my first M.2 SSD and I was pretty shocked when i saw the temperatures jump to 67C in just a matter of seconds. I know they like to run somewhat hot, but I could only imagine the temps it would reach when doing something that was a bit more work than just a quick speed test. So I figured a heatsink might be a good idea and stumbled on these (yes there are 2). I only really needed the one, but I also have a stick of Optane installed and figured I could use the other just to cover up the blue PCB. Anyways, I ran the same test at the same ambient temperature and the NVME only reached 33C! They definitely work as intended, and they come with everything needed to install. There were 4 decent quality thermal pads (2 standard thicker ones for each heatsink, a thinner one for the under side of the one with a backplate, and one that has precut squares in case you'd just like to put pads on certain chips like the controller.), as well as cleaning cloths, a mini screwdriver, and screws. Install was a breeze (though there are NO instructions or pictures included), use the cleaning cloths to make sure there's no grease or residue on the surface of the heatsinsk, peel off the adhesive on the thermal pads and stick them on the sinks (they aren't overly sticky so you can get them back off fairly easily), then the bigger ones halves just slot together and gets tightened with screws and the smaller one uses good quality silicon bands to hold pressure onto the M.2, then just install onto the mobo as normal. PROS: -They feel like good quality aluminum and the finish on them is nice -They don't take up much space at all if you're concerned about tight spaces -Thermal pads feel good quality and weren't dried out -They include all necessary bits to install them -Easy enough installation -They do cool surprisingly good! -Fitment is good -Great value for 2 heatsinks! CONS: -No instructions. It's still easy to set them up thankfully, just remember the thinnest pad goes on the bottom inside of the 2 piece heatsink -Finish on the visible area is good, but on the side that contacts the pads there were some scratches and small nicks. No big deal as it's not going to be seen and it doesn't affect anything, but just wanted to put that out there - The heatsink that uses the silicon bands doesn't quite go the full length of the SSD, it still covers all the necessary parts but i wish they had it go to the end of the drive with a little notch cut out for the screw like the bigger sink. Still have a bit of blue PCB showing. I'd recommend these to anyone looking for an inexpensive and effective solution for cooling their M.2 drives!

I bought the SN850 without the heat sink on sale several months ago because of concerns about clearance. If I had bought the heat sink version I wouldn't have bothered looking for a separate one. OK, first up I used the band mounting system, NOT use the screw mounting system. It -might- have worked with the screw mount, but I didn't try it. There is not a lot of clearance, and the bands seemed to offer the best option of clearance with even, consistent pressure over the entire drive length without having to worry about the side screws loosening over time thanks to the thermal expansion & contraction. I didn't bother with the under tray either. Since the SN850 is a single-sided drive there was no real reason to if not using the screw mounting system, which I wasn't. You can only use it with the thicker of the two options anyway, and I wound up choosing to go with the thinner option. Both the thinner and thicker options will work using the bands, however when I was using the thicker one it appeared that it was just tall enough that it was contacting the PS5's drive bay cover when it was put back on. That meant when the cover was screwed down it would be putting pressure on the drive, and thus pressure on the socket, which I did not want to do. The thinner option allowed the drive bay cover to be replaced & screwed down without contacting the drive, thus not putting any additional stress on the drive. Overall I was actually really pleased with this. Multiple size and mounting options in a single kit at a reasonable cost, along with the thermal interface material.

I needed a heatsink for my 500GB Samsung 970 EVO+. This fit the bill nicely. I chose to use the larger of the two heatsinks (I didn't realize each heatsink is used on its own) and it runs significantly cooler. I'm seeing 5-15°C decreases under load. Before the heatsink, it would hover around 70°C during a 5x1GiB benchmark with CrystalDiskMark. Now, it peaks at 64°C during a 5x8GiB benchmark. My system has two front-mounted fans and one in the back, so the heatsink is probably getting a little extra airflow. Installation was fairly straightforward, if a little fiddly. No instructions are included with the kit, so you have to go back to the listing. Removing the protective plastic from the thermal pads and placing them was kind of difficult. The included screwdriver doesn't fit the screws quite right, but it works. Overall, I'm very pleased with what I got for my money. Everything you need is included, and everything appears to be good quality. I will say that the larger heatsink was red instead of black, which I chalked up to a shipping or warehousing error as opposed to an actual product quality problem. EDIT: It does actually show in one of the pictures that you may receive a red heatsink. I find that a bit annoying as a red heatsink doesn't look right in certain builds, but for the price, I'm still happy.

This was super easy to use, the material was good and the fit was amazing

This is a perfect heatsink for the PS5. Easy to assemble and worked perfectly with the S70 Blade SSD

Very easy and smooth installation, material quality was good. Everything lined up perfectly.

El disipador de calor funciona correctamente muy buen articulo 100% recomendado

It did not include two sets as advertised/expected/needed, it had two different SETUPS/configurations. It was easy enough to assemble both SETUPS, and they seem to be helping the cooling. I will have to buy another set somewhere now.