VIVO Premium Aluminum Heavy Duty Monitor Arm for Ultrawide Screens up to 49 inches and 33 lbs, Single Desk Mount, Pneumatic Height, Max VESA 100x100, Black, STAND-V101G1

I have been looking for an arm for my 45 lg and couldn’t get a clear answer about this one. So I decided to buy it and try it. I have no complaints at all. It’s most sturdy if you add a board, but i would do this even with a 500$ mount. It’s not gonna fall if you take your time and adjust the bolts for tension. Always add a touch extra, even with small monitors. It hold perfectly. No wobble unless I bump my desk. Moves freely and easily when I need it. I think people don’t tighten the tension enough. It’s supposed to be a little stiff when u let go and free up when it starts moving.If you’re looking for the 45 lg oled ultragear then this works!Installs easy. Common sense. Took about two minutes to install the second one once I took my time with the first.They don’t tell u but it has a little tool holder on the back so u can adjust tension on the fly! That should be advertised.Usb iWorks great! Audio cable isn’t really needed these days.Highly recommend!

The monitor I am using is the SAMSUNG 49" Odyssey G93SC Series OLED (27.80 lbs). There are different versions of this type of monitor, with minor variations in the back mount. I read all of the reviews where people said this monitor arm would fit the G9, and during installation, those statements came into question.If you take the factory monitor mount off of this monitor, you cannot directly connect this VIVO Premium Monitor Arm straight to the monitor as is. You will need the black metal wall/VESA mount that comes with the Odyssey monitor. I received my monitor about a month ago and, luckily, held on to it. With this part in hand, installation is rather easy.As others have noted, there is some sagging taking place with this monitor once installed. I've tightened (greatly, as it seemed to have too much torque) the specific bolt that manages this articulation, and the sagging is no longer present. We will see how this holds over time. I will update this review if I have future issues with sagging. I live rather close to a railroad, so the slight vibrations will really put this bolt to the test. We will see.The movement of the arm could be better, but for the price, this is great.To any who has purchased or plans to purchase the SecretLab Magnus Pro XL Desk, this monitor arm definitely fits this desk. During the extensive research of building my office, this was a concern I saw all over the internet. I bit the bullet and purchased this monitor arm without knowing for sure if it would fit or not, a sacrifice for my fellow computer nerds that paid off. Currently, SecretLab does not have a monitor arm for sale that can support a monitor of this weight, but that is supposed to change soon, according to their website. Please do note that you will come across some installation issues when installing this monitor arm to the Magnus Pro XL; luckily, I am here to walk you through that process. *kiss face emoji*The cable management tray is not too shallow to initially place the monitor arm, but it is too shallow to tighten the bolts on the bottom of the clamp to ensure your arm doesn't slide around. There are at least two ways to tighten the bolts; I know this because I mounted the arm in the center of the desk, fastened the bolts through a rigamarole process, and then realized that the monitor arm needs to sit several inches to the left to properly center the monitor on the desk. The second go around, I found a quicker way that involved tools that didn't come included. Below are both of the methods I used.How to tighten the clamp on a Magnus Pro XL Desk WITHOUT extra tools::- You will need to remove the two screws on each side of the desk that hold the cable management tray in place (4 screws total). Then you make your way to the remaining four screws on the bottom of the desk that hold the cable management tray in place. You DO NOT need to completely remove these screws; only loosen each screw a couple of turns, and the tray will sag enough to allow you to get the Allen wrench inside to tighten the monitor arm clamp bolts. Don't make my mistake; ensure that your monitor is positioned on the desk where you want it before tightening these bolts. You don't want to have to do this again. I moved mine 5-6 inches to the left of the center. The center can be found by looking at screw placements on the inside of the cable management tray. Once the bolts are tightened, tighten the 4 screws on the bottom, and reconnect the 4 screws that go on each side.How to tighten the clamp on a Magnus Pro XL Desk WITH extra tools::- Take a Dremel tool or any other saw/torch/etc., and cut the Allen wrench to a shorter length. I've included a picture of how short I cut my Allen wrench. This method is 100 times easier than the first.I gave this monitor arm an overall rating of 5 stars, mostly because of the price. As for Sturdiness, I gave this monitor arm 4 stars due to some crucial parts being plastic, Easy to assemble got 4 stars, and Range of motion got 4 stars.I would recommend buying this monitor arm, though if you have the patience, the SecretLab Ultrawide Monitor Arm should be available soon; that one will likely be a better quality and also look better.

Bought this to support a 34" ultrawide to stack on top of my 57" ultrawide. assembly was easy and it's quick to put together. took probably 15 mins or less. the monitor arm is strong and sturdy and easily supports the weight of the 34". i can move it around no problem without any issues. i like how it had slots on the covers to hold the hex keys. makes it easy to grab them whenever i need to make adjustments. I can angle it down for better visibility when i'm looking up at the monitor.my only con is that the mount arm was initially not high enough to clear my 57" monitor. I had to stack some stone coasters under the desk clamp to raise it up a few inches, which seems to be working just fine.overall great arm, just wish it was a bit higher.

Everything about this product is great, except the tilt mechanism of the monitor mounting plate. It barely hold a Samsung Odyssey G9 and requires aggressive tightening.Otherwise, fantastic product and nearly as nice as the arms that are 3x the price.Would have given 5 stars if the tilt mechanism was better since this if listed as handling the G9

After trying multiple arms that always sagged from the weight of the monitor I almost gave up on the idea all together…until a friend recommended this one. This thing is a beast and holds up my 34” ultrawide OLED monitor amazingly. The movement & adjustment is flawless as well. Honestly, it works so well that I’m considering getting an additional 45” OLED monitor for my setup and am completely confident I can get another one of these to hold it without any issues.

Heavy duty, highly adjustable and fairly easy to assemble.Some elements could have been designed slightly better:1. The mini "Hooks" used to mount the display to the arm (VESA) could have been much larger thus allowing safer single person mounting.2. The desk attachment mechanism could have been done in a tool less fashion.But considering the price tag I cannot in good concise deduct a star.I used this monitor arm to replace a very high end (500$) decade old monitor armand overall it is actually better and provides better functionality.

It’s great product. Very easy to install. I got two for each monitor and it can support without a hassle. 32” and 27” for some reason I was expecting more adjustability but the way it is is definitely more than what I needed.