🔧 Upgrade Your Toolkit with Confidence!
The Senco YK0360 Repair Kit is an OEM authorized replacement part designed for various Senco models. Weighing just 9.2 ounces and measuring 7.25 x 5.5 x 3 inches, this kit is lightweight and easy to use, with no batteries required. Perfect for professionals seeking reliability and efficiency in their repair tasks.
| Manufacturer | Senco |
| Part Number | YK0360 |
| Item Weight | 9.2 ounces |
| Product Dimensions | 7.25 x 5.5 x 3 inches |
| Item model number | YK0360 |
| Item Package Quantity | 1 |
| Batteries Required? | No |
C**N
Good directions
Worked great. Came with easy to follow instructions. Took me an hour but everything went smooth and nail gun works like new.
M**S
Great rebuild kit
Ordered this rebuild kit for my Senco 601 framing gun, worked great. Gun fires good, P.S. don't let gun set idle without putting some nails in it and firing some into a 2x4 to keep "O" rings from drying out. I ordered some Senco pneumatic oil with this rebuild kit to drop about 8 to 10 drops of oil in quick connect fitting. Another P.S. I always take photos with cell phone as you disassemble it, or anything mechanical, my memory is not as good anymore.
T**R
All you need
Everything you need to rebuild a nail gun. Mine was a SENCO 601. Super easy.
J**N
You may need additional parts
Purchased the repair kit for a Senco framepro 602 that basically was DOA. The plastic firing valve had disintegrated into fragments inside the gun....after disassembly, i noticed that the plastic seal pn BC0484 (top of piston assy) as well as plastic washer pn BC0485 (bottom of firing valve) were also shot, so had to order those as well from another source...guns now pretty much new and completely rebuilt, should last another twenty years....if the other parts above were included in the kit I would say it was a "complete" rebuild kit...all in all quality parts w/ easy to understand assy instructions. It is advertised as a repair kit vs. rebuild kit....way cheaper to get this kit vs. individual parts..all in all I basically have a new nail gun. The last pic is pieces of the firing valve plastic part beside the new one that was provided...old gun, but worth the $75 total it took me to rebuild it. If you are confused about which o-ring goes where, disassemble carefully and label, bag and photo as you go...you can find parts diagrams online. also clean everything very well (I used an ultrasonic cleaner w/ mean green water solution) pick helps remove the old o-rings. fine steel wool to polish aluminum surfaces and use provided grease and senco oil during re assy...
A**Y
Quality of repair kit
Complete kit to repair my 15 year old nailers
D**.
Great parts and information
I used all of the parts. I fixed my nail gun and it works great, thanks.
P**N
Factory parts
Bought a cheap Chinese knock off, and waisted my money and time. Get this kit and make your nail gun like new!!
J**A
not for amateurs...
I tried, but couldn't put humpty dumpty back together again...
